Turbine inlet valves are used for turbines and pumps for safety and shut-off purposes under high operating pressure. They are closed automatically because of the hydraulic counterweight return actuator without an outside source. Even in emergency situations, they are able to close even against unidirectional pressure at the maximum rate.
Turbine Inlet Valve
Specifications
| Valve Size | 10″ — 56″ |
| Valve Type | Trunnion |
| Body Type | Bolted |
| Seat Type | Spring Loaded / Hydraulic Loaded |
| Pressure Class | Up to 250 Bar |
| End Connection | RF / BW / Customer Specs. |
| Bore | Full Bore |
| Operator | Actuator |
| Material | Carbon Steel / Stainless Steel |
| Operating Temperature | Low / Standard |
| Design Standard | ASME B16.34 / API 6D / ISO 14313 / ISO 17292 |
| Face to Face Standard | ASME B16.10 |
| End Connection Standard | ASME B16.5 / ASME B16.25 / DIN EN 1092-1 |
| Test Standard | API 6D / ISO 10497 /API 6FA |
| Fire Safe Standard | API 607 / ISO 10497 / API 6FA |
| Certification | EN 10204 3.1 — 3.2 / ISO 15848 Fugitive Emission / 2014-68-EU PED / SIL Capable |
